Amplivox Audiocups

In the fall of 2009, I picked up two pairs of Amplivox Audiocups headphones on eBay; a 10 Ohm pair utilizing TDH-39P elements for $15 (+ $10 shipping) that came with a 6.3mm tip left stereo plug and a 300 Ohm pair utilizing the older TDH-39 elements for $9.99 (+ $11.27 shipping) that came with a DB9 plug. I was interested in obtaining a pair of Audiocups because I was looking for a set of passive headphones that I could use in a very noisy environment for two-way radio communications. I figured anything that could provide a quiet environment for hearing tests could do the job and comments from others who have used them this way confirmed my assumption. As these were originally designed for use with audiometers, there are many different types of plugs and wiring configurations available so it was just luck that the first set had a common type audio plug. Some have DIN plugs for use with devices such as the Medelec Synergy EMG/EP Monitoring System. Some have a DB9 connector which is used with a Cadwell 5200A EMG unit. Some have a single 6.3mm stereo plug (wired either tip left or tip right depending on the audiometer it is to be used with) and others come with two 6.3mm monaural plugs, one for each audio channel. For the DB9 connector, it was a simple matter to make an adapter that converts the DB9 connector (pin 4 left, pin 5 right and pin 9 common) to a 6.3mm stereo plug. I had considered removing the DB9 connector and replacing it with a 6.3mm connector but it is installed so well with heat shrink tubing around each individual DB9 connection that it seemed a shame to destroy it. The Audiocups are indeed very quiet and I have found them to be quite useful in blocking out just about all exterior noise.

As noted above, Audiocups were designed for hearing testing and the Telephonics TDH (Telephonics Dynamic Headphone) series TDH-39 and TDH-49 headset elements that are used with Audiocups have a relatively flat frequency response up to 8 KHz (see TDH series specifications). They work okay for music, and I have used them for that purpose, but commercial headphones designed specifically for listening to music would have better upper end frequency response. I should note that before they were adopted as the standard for hearing testing, the Telephonics TDH-39 headset and its cousins the TDH-49 and TDH-50 were originally designed for and are still used on some aircraft. The MX-41/AR (NSN 5965-01-331-8708) cushions used with these headsets were originally used on military aircraft with headsets such as the HS-23 and HS-33 (see MX-41/AR below).

My only complaint is I wish it was easier to get parts as only medical supply companies carry the parts and they are not cheap. This is probably a symptom of the overall problem of the medical industry. Parts are expensive because they can be. A set of TDH-39 headset audio cables (M745TL or CO-19TR for example) that should probably cost around $15 sell for $45 and up because the price will ultimately be borne by the patients and the insurance companies. In fact, a Google search shows new Audiocups with TDH-39 elements range from $350 up to $419 with one list priced at $569. Compare this to used eBay prices which run in the range of $40, though one set of used Audiocups wound up selling for $103 due to aggressive bidding by relatively new eBay members.

Additional comments by another Audiocups owner can be found at http://zachmargolis.com/archive_nojs/14.

For comments or corrections to this page, please contact Robert G. Schaffrath at:

Specifications

	10 Ohm Audiocups Headset Switchcraft branded Audio Cable: M745TL - Tip Left TDH-39P 296D000-1 Elements MX-41/AR Cushions, NSN 5965-01-331-8708

	300 Ohm Audiocups Headset DB9 Audio Cable: Pin 4 = Left, Pin 5 = Right, Pin 9 = Common (Originally used with a Cadwell 5200A EMG Unit) TDH-39 Elements MX-41/AR Cushions, NSN 5965-01-331-8708

	MX-41/AR Cushions (NSN 5965-01-331-8708) Standard black MX-41/AR cushions as well as red and blue varieties used with audiometric headsets. These are some samples that the Pierce-Roberts Rubber Company generously provided me so that I could repair two classic military headsets that had old damaged MX-41/AR cushions. One headset had the classic black variety and the other headset had one red cushion and one blue cushion. MX-41/AR is a Joint Electronics Type Designation System (JETDS) MIL-STD-196E designator; Unit indicator MX for Miscellaneous (equipment not otherwise classified in the JETDS), 41 for the forty-first unit designated as miscellaneous in the JETDS and /AR for Aircraft Radio

	DB9 to 6.3mm Stereo Plug Adapter An adapter cable I built using a commercially manufactured shielded DB9 male to female cable and a gold plated 6.3mm stereo plug. The connections are as follows: DB9 pin 4 connects to tip DB9 pin 5 connects to ring DB9 pin 9 connects to sleeve

	10 Ohm Medelec Co-Branded Telephonics TDH-49P Headset 5-pin 180° DIN Audio Cable: Pins 1 & 3 = Right, 4 & 5 = Left TDH-49P Elements 296D100-1 Telephonics 510C017-1 (Type 51) Cushions, NSN 5965-00-280-3607 The elements of the Telephonics TDH headset, such as this TDH-49P, are used with Audiocups. The elements are removed from the Telephonics or HB-7 headband and are installed in the Audiocups assembly. Refer to the Audiocups assembly instructions for more information. Two pairs of these relatively new TDH-49P headsets were acquired on eBay for $6.95 each (free shipping).

Links

Audiocups Stock Photos

Amplivox Audiocups

Last modified February 8, 2010